Housings from BOPLA
Automatic machine controls, industrial plant controls, handheld devices for operating machines and plants, and devices for production data acquisition in production are typical examples in the field of mechanical and plant engineering that use electronic enclosures. Enclosures are often exposed to harsh environmental conditions in industrial production. Therefore, they require high IP protection and impact resistance (IK). In addition, the input unit used should be robust and wear-resistant. For modern operation of systems or processes visualized via a touchscreen, electronics housings should offer the option of integrating a touchscreen and/or display and be easy to read. In principle, a high level of user-friendliness is a matter of course.
This includes the series:
Alubos
This is a universal aluminum profile housing with IP 65 protection.
- 5 profile variants
- 10 profile cross sections
- Standard lengths from stock
- Special lengths available at short notice
- Functional end caps made of die-cast aluminum
- Good EMC shielding
- Design seals in 5 colors
- Extensive accessories
- Good heat dissipation in combination with IP 65
Additional Information:
Bocube
The Bocube is unique in its form and versatile.
- Innovative and patented hinge closure technology without screws: open by screwdriver, close by hand.
- More than 25 sizes and 150 standard combination possibilities
- 2 material variants: ABS or PC UL 94 V0, flame retardant and self-extinguishing.
- Captive lid with membrane keypad surface in two variants: gray or crystal clear
- Elegant design with color variations of the hinge locks
- Particularly recycling-friendly due to the use of pure plastics without injected metal parts
Additional Information:
Bocube Alu
The new design and innovative features protect even in demanding environments.
- 10 sizes
- Modern design, corresponding to the Bocube plastic housing
- All housing components made of metal
- Many styles are listed under UL File No. 196 706
- Captive lid with smooth surface or recessed membrane keypad area
- Hinge integrated into the housing design
- BA-S version with screwed lid on both sides and recessed surface for membrane keyboards
- No visible housing screws
- Prepared for cost-efficient integration of pressure equalization elements (DAE)
Additional Information:
BoPad
The BoPad is a handheld case that impresses with its modern design.
- 5 basic sizes
- 2 colors
- Straight or desk-shaped variants
- Battery compartment variants up to size BOP 900
- Design seal optional
- Shock protection optional
- Optimized for integration of touchscreens or displays (BOP 7.0 / 10.1)
- Direct VESA mounting possible (BOP 7.0 / 10.1)
Additional Information:
BoTouch
The BoTouch is optimized for the installation of resistive and capacitive touchscreens.
- BoTouch plastic (BTK / BTK-IP) optimized for capacitive touchscreens (from 4.3" to 10.4")
- BoTouch aluminum (BTA) optimized for resistive touchscreens (from 5.7" to 12.1")
- project specific variants on request
- case front / front foil: project specific back- or printed
- rear cover / housing frame with clamping elements for panel mounting
- project specific display mounting plate made of aluminum (a sample, CAD data or a data sheet of the touch/display combination are required)
- Starter kits consisting of housing incl. mounted display available for various designs
Additional Information:
Euromas ABS/PC/F05
Classic polycarbonate or less expensive ABS housing.
- 36 sizes
- 19 different M...V0 versions according to UL 94 V0
- The PC housings (also in UL 94 V0) are suitable for outdoor use (f1 listing according to UL 746C)
- The material PC UL 94 V0 corresponds to the requirement set R22 according to DIN EN 45545-2 of the hazard level HL3 (railroad standard)
- Terminals and mounting on request
- Fastening screws for mounting rails or mounting plates included in the scope of delivery
- Versions with F05 receptacle made of antistatic plastic Vestamid
Additional Information:
Euromas II
Electronic enclosure with protection class IP 65 with screw connection technology ready for installation.
- 29 sizes
- 2 material variants: PC or ABS
- PC enclosures are suitable for outdoor use (f1 listing according to UL 746C)
- 2 cover variants: smooth or recessed with membrane keypad surface
- Insertion grooves for printed circuit boards
- Offset cams for clamping rectangular PCBs
- Clamping and assembly on request
- Particularly recyclable due to use of pure plastics without injected metal parts
Additional Information:
Euromas Alu/F05
Robust aluminum housing with IP 66 protection.
- 43 sizes
- Listing under UL File No. E 196 706
- Materials comply with requirement set R1 or R7 to DIN EN 45545-2 of hazard level HL3
- Versions with silicone lid seal with higher temperature resistance (approx. 200°C)
- Versions with clear cover on request
- EMC package to increase electromagnetic shielding properties on request
- Versions with F05 receptacle
Additional Information:
CombiCard 1000-3000 / CombiSet 500
Optimum integration of electronic components possible due to modular design.
- 4 widths
- Depth is variable by combination of components (not with CC 500)
- Different fronts
- Rear part optionally with separate terminal compartment (not with CC 500)
- Definable access protection
- Installation of 19" components possible
- Extensive accessories
Additional Information:
CombiCard 5000-7000
Variable and modular enclosure system with IP 66 protection.
- 3 widths
- The depth is variable due to the combination of the components
- Easy assembly of the system components
- Hinge and access point freely selectable throughout the system
- Different fronts
- Rear part optionally with separate terminal compartment (also on both sides)
- Definable access protection
- Installation of 19" components possible
- Extensive accessories
Additional Information:
